ONU XPON AC1200 4xGE AND UP TO 2xFXS – SDN775X-V3

In stock

TECHNICAL DATA

Standards	IEEE 802.3,IEEE 802.3u, IEEE802.3ab. IEEE 802.3x, IEEE802.1Ǫ, IE- EE802.1P, IEEE802.1D, IEEE802.11b/g/n, IEEE802.11ac, ITU-T G.984.1, ITU-T G.984.2, ITU-T G.984.3 , ITU-T G.984.4
Topology	Star Topology
Uplink port	1 GPON/EPON WAN port, SC/APC connector
Transmission distance	Up to 20km
Downlink port	4 Ports 10/100/1000Base-Tx Gigabit Ethernet
VoIP Ports	Up to 2 FXS Ports
Wi-Fi	IEEE802.11b/g/n 300Mbps + IEEE802.11ac 867Mbps Wi-Fi
LED indicators	Power, PON, LOS, Internet, VoIP1, VoIP2, GE1-GE4, Wi-Fi, WPS
Ethernet cable	10Base-Tx: UTP category 3, 4, 5, up to 100m 100Base-Tx: UTP category 5, up to 100m 1000Base-Tx: UTP category 5, 5E, 6, up to 100m
Fiber cable	8.3μm, 8.7μm, 9μm and 10μm Singlemode
Power supply	AC110-240V Input, DC 12V, 1A-1.5A output External Power Supply, 4KV Surge Protection
Temperature	Operating: 0°C – 45°C Standby: -40°C – 70°C
Humidity	Operating: 10% – 90% Standby: 5% – 90% RH

The SDN775x-V3 ONU series is a family of AC 1200M hybrid XPON ONUs with EasyMesh WiFi designed for FTTx applications. The ONU family supports GPON and EPON features in the same device, and supports 2.5G download speed and 1.25G upload speed. The ONU family also supports the latest Mesh technology, and a mesh kit at full capacity can cover an entire area of 1500 square meters with high Wi-Fi signal density.

Supports ITU-T 984.x GPON and IEEE802.3ah EPON standards;
Compatible with Huawei, ZTE, Fiberhome, Nokia, CHIMA OLTs;
Wi-Fi Router Standards and Categories IEEE802.11ac 867Mbps + 11n 300Mbps;
Mesh Controller, supports 1500 square meters WiFi coverage when using other Mesh Agents;
1 SC/APC GPON / EPON WAN port for 2.5G download and 1.25G upload;
4 LAN ports with wired Gigabit Ethernet speed;
Up to 2 FXS ports for high-quality VOIP (Voice over IP) implementations;
AES 128-bit encryption and key exchange, increasing transmission security;
Switch functionalities (L2 Switching), support for 1Ǫ VLAN, 802.1P ǪoS, Bandwidth Control, Spanning Tree, etc.;
Layer 3(L3) Home Gateway/CPE features with NAT to support multiple WAN interfaces at the same time to implement different services (Route/Bridge mode, Voip, Vlans);
Port Binding, different LAN ports can be designated with different WAN services;
Maximum 1:128 fiber split ratio Fiber to GPON, maximum 20km transmission range;
Maximum 1:64 fiber split ratio Fiber to EPON, maximum 20km transmission range;
Supports FEC (Forward Error Correction), ensures highly accurate and reliable data transmission;
Supports DBA (Dynamic Bandwidth Allocation) and Smart bandwidth assignment;
Supports OMCI and TR069 management, remote subscriber management by systems and software that use these protocols.